Drywall


Drywall Repair Tips: How To Repair Popped Nails In Your Drywall

Today, using screws are now very common when installing drywalls. However, in some areas, nails are still used for this kind of job. If you have drywalls in your home that was installed using nails, then you may encounter some problems with it. There will be a time where the nails may come loose and can pop through the surface. Not only that this is unattractive, but it is also dangerous as your body may get snagged on the loose nail and cause injuries.

If you inspect your home closely, you may find some popped nails around the edge of ceilings and also on external walls where temperatures can get extreme. You have to remember that extreme temperatures can have different effects on metal and the surrounding wood.

The head of the nails may get a small amount of condensation, which can lead to rust discoloring. This can cause the head of the nail to fall of entirely, which is what you don’t want to happen. This is very common on older houses and on some cases the nails may pop out if the house has settled somewhat over time.

If you think that your house has settled too much or too quickly, you have to contact a home inspector in order for you to find out what caused it. It may mean that structural repairs may be needed, which means that it will be of no use addressing to the cosmetic issues of popped nails.

When it comes to popped nails on drywalls, you have to remember that you cannot fix it by tapping the nail back in the wood. The cause of making the hole where the nail used to be to become slightly larger than the nail cannot be fixed and the nail you tap back in will eventually move again some time later.

If you want to hold the nail securely, you can do this by simply tapping in another nail. To make sure that the new nail will go in to the wood behind, you can drive a drywall nail next to the popped nail. This will enable the new nail head to overlap the popped nail. After doing this, you have to drive the nails to a slight dimple. You can test if the nails are driven in far enough with the use of metal putty knife by dragging this tool across it. When you feel that the nail heads are dragging, drive them in a bit more.

Filling the dimple that you made is also a lot easier thanks to color changing fillers. The bright pink is a popular choice as it turns to white when it dries.

With this, you will be able to finish the job with two or three coats and a light sanding between applications will ensure a smooth finish.

As you can see, repairing popped nails on your drywall is very easy. Just follow these tips and you will be able to get your drywall looking great again and also prevent the nails from popping out again.

 

 

Search This Site

Drywall

 

 

 

Drywall


Drywall Finishing: Great Tips To Help You Properly Finish Your Drywall

... that it takes years of practice before you do a perfect job. There are so many techniques that you need to learn as installing drywalls is not as simple as hammering it in place. So, here are some of the tips that you have to keep in mind in order for you to properly install drywall in your home. Firstly, ... 

Read Full Article  


The Proper Way To Patch Your Drywall

... is make the fix unnoticeable. To do this, just get a putty knife and dig out a little compound. Then, press the compound in to the cracks that you see around the newly fixed piece of drywall. After this, you can now get your drywall tape and cut it in to lengths that you need in order for it to cover ... 

Read Full Article  


Get Excellent Results When Finishing Your Drywall

... Always keep in mind that drywall finishing requires a lot of skills. You have to be patient and you need to have the proper tools to work with. By having the proper tools, you can be sure that you will be able to get the best results possible when finishing your drywall. Today, you will be able to find ... 

Read Full Article  


The Proper Way To Paint Your Drywall

... and fade. In fact, it can look uneven even after painting it. Use a good quality latex stain-killing paint before you prime it in order to fight the yellowing process. Two coats of paint should be enough. On the first coat, use a low sheen, latex flat wall paint. This should be tinted to match the color ... 

Read Full Article  


The Drywall: Tips To Properly Install Your Drywall

... time and money on repairs. The first tip will concern the surface on which you will install the drywall on. The walls should be flat and the framing should be straight at right angles. You also have to remember that the studs or rafters that are bowed should be planed first in order to flatten them before ... 

Read Full Article